The reason why Xuankong Temple doesn't fall

There were a few reasons why Xuan Kong Temple had been able to survive for thousands of years. First of all, the true center of gravity of Xuan Kong Temple was supported by the hard rock, using the principles of mechanics as the foundation. Secondly, the wood used in Xuankong Temple was the local specialty, the ironwood. After being soaked in tung oil, it had an anti-corrosion effect and was not afraid of termites. In addition, the wooden support of Xuankong Temple was mostly made of pine and cypress wood. This kind of wood was fine and hard, and it had the characteristics of corrosion resistance and durability. Finally, Xuan Kong Temple used the principle of the ancient expansion screw to increase the stability of the building. To sum up, the reason why Xuan Kong Temple could not collapse for thousands of years was because its structural design was reasonable, it used strong and durable materials, and used some special construction techniques.

At present, no relevant information was provided about the cause of the fall of the Xuankong Temple tourists.

Xuan Kong Temple would not fall. It was reported that Xuankong Temple was constructed of wood and adopted an elastic architectural design. It could shake with the earthquake, effectively cushion the impact of the earthquake. In addition, the true center of gravity of Xuankong Temple was supported by the hard rock, using the principles of mechanics and the structure of the flying beam to support the temple. The architectural design and structure of the Xuankong Temple allowed it to withstand the test of thousands of years and become an architectural miracle in the world.

There were several reasons for the construction of Xuan Kong Temple. First of all, Xuankong Temple was built on a cliff because this place was the main road to Wutai Mountain in the south and Datong in the north. It was convenient for believers to come and worship. Secondly, the Hunhe River here flowed past the foot of the mountain in front of the temple. It often caused disasters due to heavy rains, and the river flooded. People thought that the Golden Dragon was causing trouble here, so they thought of building a pagoda to suppress it. Therefore, Xuan Kong Temple built a temple on this cliff. The architectural feature of Xuan Kong Temple was the use of wooden beams called "Iron Carrying Poles" to support the pavilion. These wooden beams were deeply embedded in the rocks to bear the weight. In addition, standing trees (pillars) also played a supporting role. The landing point of each standing tree had been carefully calculated to ensure that it could support the entire Xuankong Temple. In general, the reason for the construction of Xuankong Temple was to facilitate the pilgrimage of believers, suppress the flooding of the river, and use special wooden beams and standing trees to support the entire temple.

The reason why Xuan Kong Temple had not collapsed for thousands of years was its unique architectural structure and location. The architectural structure of Xuankong Temple used the principle of mechanics to support the center of gravity in the hard rock. It also used the rock that looked like a right-angle echelon to insert the flying beam, making it sufficiently close to the sharp corner of the right-angle echelon, thus achieving stable support. In addition, Xuankong Temple used the local specialty hemlock wood as the material of the flying beam. After soaking in tung oil, it had an anti-corrosion effect and was not afraid of termites biting. It also helped it to last longer. The location of Xuan Kong Temple also played an important role. It was located on a cliff at the foot of the mountain, with its back facing the steep mountain wall and facing the canyon abyss. It could maximize the protection of the natural environment and avoid direct attacks from the wind and rain. In summary, the reason why Xuan Kong Temple had not collapsed for thousands of years was because of its unique architectural structure and location, as well as the use of special materials and anti-corrosion treatment.

There were many reasons why Xuan Kong Temple had stood for thousands of years. First of all, the architectural structure of Xuankong Temple used the principle of mechanics to support the center of gravity in the hard rock. It also used the rock that looked like a right-angle echelon to insert the flying beam so that it was close to the sharp corner of the right-angle echelon, thus achieving a stable support. In addition, Xuankong Temple also used the ancient expansion screw technology. Through the expansion and fixing of the screw, it increased the firmness of the building. In addition, the wood used for the flying beams of Xuankong Temple was a local specialty, ironwood. After soaking in tung oil, it had an anti-corrosion effect, making the building less susceptible to termite erosion. In addition, the location of Xuan Kong Temple also played an important role. It was located in a small basin in the deep mountain valley, hanging in the middle of the stone cliff. It was less affected by the rain and also reduced the time of sunlight. In summary, the reason why Xuankong Temple had stood for thousands of years was the stability of the building structure, the use of expansion screw technology, the special selection of wood, and the superior location of the site.

The reason why the fog did not disperse was mainly due to the local climate and terrain. The following conclusions: 1. The cold air activity was not obvious and there was no rainfall. When the cold air ended, the atmosphere was in a quiet state, the wind speed was small, and the humidity increased. In this case, the pollution was easy to accumulate, and the diffusing conditions were poor, causing the fog to be difficult to disperse. 2. Mountain terrain: In closed terrains such as mountains, valleys, or basins, due to the lack of airflow and breeze, coupled with the fact that the temperature of the hillside or the top of the mountain is lower than that of the foot of the mountain, the humidity is relatively high. In combination with the above conditions, fog may not dissipate easily in the mountains. 3. Front-crossing: Fog will appear near the front, especially before the warm front passes. In this case, there were thick rain clouds above the fog, and sunlight could not penetrate. At the same time, the conditions for the formation of the fog still existed, making it difficult for the fog to dissipate. In summary, the reason why the fog did not disperse might be related to factors such as dry and wet climate, topography, and frontal transit.

Xuankong Temple was built to fulfill the last wish of Kou Qianzhi, the Heavenly Master of the Northern Wei Dynasty. Kou Qianzhi hoped to build a temple in the air to pursue the realm of "Upper Yan Xiao Ke, Lower Jue Xiao Fu". The construction of Xuankong Temple began in the first year of Tianxing in the Northern Wei Dynasty (398 AD). After decades of hard work, it was finally completed 1400 years ago. Xuankong Temple was the only unique temple in China that combined Buddhism, Taoism, and Confucianism. It was also one of the earliest wooden structures built on the existing cliffs in the world.

Xuan Kong Temple was built on the cliff for the following reasons. First of all, the area where the Xuankong Temple was located was often hit by heavy rain, so building the temple on a high cliff could avoid the erosion of the temple by heavy rain. Secondly, the Xuankong Temple was located at a higher altitude, so the sunlight was shorter. The weathering and erosion of the wood were relatively less, which also helped to protect the temple. In addition, the architectural structure of Xuan Kong Temple also played an important role. Experts believed that the pavilion of Xuankong Temple was supported by beams and rocks. The structure of the half-inserted flying beam was realized by using mechanical principles, so that the temple could withstand the impact of earthquakes and other external forces. Therefore, Xuan Kong Temple would not collapse even if it was built on the cliff.

There were several reasons why Xuan Kong Temple had not fallen for a thousand years. First of all, the wooden support of Xuan Kong Temple was mostly made of pine and cypress wood. This kind of wood was not only fine and hard, but also had the characteristics of anti-corrosion and durability. This was one of the important reasons why Xuan Kong Temple could be preserved until now. Secondly, the architectural structure of Xuankong Temple used the principle of mechanics to support the center of gravity in the hard rock. It also used the rock that looked like a right-angle echelon to insert the flying beam so that it was close to the sharp corner of the right-angle echelon, thus achieving a stable support. In addition, the location of Xuankong Temple also played an important role. It was located on a cliff and used the design of mortise and tenon structures and load bearing structures to enable the temple to withstand the test of geological disasters and rain erosion. Finally, the unique architectural style and cultural content of Xuankong Temple had attracted tourists from ancient times to the present. The people of the government and the people of the past dynasties had taken great care of it, which was also an important reason why it was intact. In general, the reason why Xuan Kong Temple could remain standing for thousands of years was due to its wooden support, unique architectural structure, and location, as well as its care and protection.